Fracture Mechanics of Concrete and Concrete Structures

›8:50 (1h15)

Plenary Lectures
P. Grassl

› Amphi 400

8:50 - 10:05 (1h15)

Plenary Lectures

Amphi 400

P. Grassl

› Durable concrete structures: cracks & corrosion and corrosion & cracks - Ueli Angst, ETH Zurich Institute for Building Materials 08:50-09:15 (25min)

› Modelling of pre-stressed concrete behaviour in the temperature range 20-70°C - Alain Sellier, LMDC, Université de Toulouse, INSA/UPS Génie Civil, 135 Avenue de Rangueil, 31077 Toulouse cedex 04 09:15-09:40 (25min)

› 3D printed capsules for self-healing concrete applications - Giovanni Anglani, Politecnico di Torino 09:40-10:05 (25min)

›10:05 (30min)

Coffee break

10:05 - 10:35 (30min)

Coffee break

›10:35 (2h05)

MS11 : Fracture and durability of structures (H. Mang, B. Pichler & Y. Yuan)
B. Pichler, U. Angst

› Amphi 400

10:35 - 12:40 (2h05)

MS11 : Fracture and durability of structures (H. Mang, B. Pichler & Y. Yuan)

Amphi 400

B. Pichler, U. Angst

› Thermoelastic multiscale analysis of concrete pavements subjected to hail showers - Bernhard Pichler, Institute for Mechanics of Materials and Structures, TU Wien - Vienna University of Technology 10:35-11:00 (25min)

› Does The Water To Cement Ratio Of Concrete Impact The Value Of Its Critical Degree Of Saturation? - Rita Maria GHANTOUS, Hautes Etudes d'Ingénieur, Oregon State University, School of Civil and Construction Engineering, Corvallis, Oregon, 97331 11:00-11:20 (20min)

› Mechanical Evaluation Of 3d Printable Nano-Silica Incorporated Fibre-Reinforced Lightweight Foam Concrete - Seung Cho, Stellenbosch University 11:15-11:35 (20min)

› Effect of Loading Frequency on Flexural Fatigue Behaviour of Plain Concrete - Keerthana Kirupakaran, Indian Institute of Science, Bangalore 11:40-12:00 (20min)

› Energy Equivalence Approach for Analysis of Reinforced Concrete Beams under Mixed Mode Loading - Radhika V, Indian Institute of Science, Bangalore 12:00-12:20 (20min)

› Influence of Softening Rock Mass Behavior in 3D Simulations of Tunneling - Magdalena Schreter, Leopold Franzens Universität Innsbruck - University of Innsbruck 12:20-12:40 (20min)

›10:35 (2h05)

MS10 : Nuclear vessel behaviour under extreme loading (F.Dufour)
F. Dufour & A. Sellier

› Amphi A

10:35 - 12:40 (2h05)

MS10 : Nuclear vessel behaviour under extreme loading (F.Dufour)

Amphi A

F. Dufour & A. Sellier

› Minerals expansions in aggregates: a micromechanics-based investigation of damage - Yann Le Pape, Oak Ridge National Laboratory [Oak Ridge] 10:35-10:55 (20min)

› Cracking at early age of a massive reinforced concrete structure : case of the gusset of the VeRCoRs mock-up - Jacky Mazars, Sols, Solides, Structures-Risques, Laboratoire 3SR 10:55-11:15 (20min)

› Fracture propagation in nuclear graphite - Lukasz Kaczmarczyk, School of Engineering, The University of Glasgow 11:15-11:35 (20min)

› Uncertainty propagation through Thermo-Hydro-Mechanical modelling of concrete cracking and leakage – Application to containment buildings - Julien Baroth, Univ. Grenoble Alpes, 3SR, F-38000 Grenoble France CNRS, 3SR, F-38000 Grenoble, France 11:35-11:55 (20min)

› Effect of the spatial correlation of damage properties of concrete on the structural cracking patterns - DAVID BOUHJITI, Laboratoire sols, solides, structures - risques [Grenoble] 11:55-12:15 (20min)

›10:35 (2h05)

MS7 : Probalistic aspects of fracture (Miroslav Vořechovský)
M. Vorechovski, P. Grassl

› Room 20

10:35 - 12:40 (2h05)

MS7 : Probalistic aspects of fracture (Miroslav Vořechovský)

Room 20

M. Vorechovski, P. Grassl

› Size Dependence of CoV of Shear Strength of RC Beams and Comparison with Fishnet and Hierarchical Models - Zdeněk Bažant, Northwestern University 10:35-11:00 (25min)

› Error in the probabilistic characterisation of concrete fatigue - José J. Ortega, Universidad de Castilla-La Mancha 11:00-11:20 (20min)

› Reliability Analysis of Concrete Beams Reinforced with Carbon Fiber-Reinforced Polymer Bars - Felipe Augusto da Silva Barbosa, Escola Politecnica da Universidade de Sao Paulo [Sao Paulo] 11:20-11:40 (20min)

› Analytical random field-based model for fracture in concrete - Miroslav Vorechovsky, Brno University of Technology, Inst. of Structural Mechanics 11:40-12:00 (20min)

› Increasing the design shear strength of concrete bridge decks by tests and statistical analysis of a shear database - Maike Harter, Hamburg University of Technology (TUHH) 12:00-12:20 (20min)

› Full normalization of the cyclic creep curve of steel-fiber reinforced concret - Gonzalo Ruiz, Universidad de Castilla-La Mancha 12:20-12:40 (20min)

›10:35 (2h05)

B : Experimental methodologies 
C.K. Leung

› Room 23

10:35 - 12:40 (2h05)

B : Experimental methodologies 

Room 23

C.K. Leung

› Fracture Behaviour of Ultra-High Performance Concrete - AWADHESH SHARMA, Indian Institute of Technology Roorkee, Roorkee 10:35-10:55 (20min)

› Repairing of short reinforced concrete corbel by bonding composite material under continuous load - Ivelina IVANOVA, Université de Technologie Chimique et de Métallurgie Sofia 10:55-11:15 (20min)

› Shear behaviour of polyolefin and steel fibre-reinforced concrete - Jaime GALVEZ, Universidad Politécnica de Madrid [Madrid] 11:15-11:35 (20min)

› Monitoring Micro-structure Evolution Using Low Cost Digital Microscope - Mahesh Mungule, Institute of Infrastructure Technology Research and Management, Ahmedabad 11:35-11:55 (20min)

› The effect of elevated temperatures on the tensile properties of Steel Fiber Reinforced Concrete by means of Double Edge Wedge Splitting test: preliminary results - Ramoel Serafini, University of São Paulo 11:55-12:15 (20min)

› Low Temperature Tensile Strength and Fracture Toughness of Asphalt Concrete Determined from Small Notched 3-p-b Samples - Binhua Wang, Chang'an University 12:15-12:35 (20min)

›10:35 (2h05)

C : Computational modeling 
F. Ragueneau

› Room 22

10:35 - 12:40 (2h05)

C : Computational modeling 

Room 22

F. Ragueneau

› Numerical modeling of crack propagation using zero-thickness interfaces elements and configurational mechanics - I. Carol, Division of Geotechnical Engineering and Geo-Sciences ETSECCPB (School of Civil Engineering) Universitat Politècnica de Catalunya (UPC) 10:35-10:55 (20min)

› Numerical Modelling of Fracture in Polyolefin Fibre Reinforced Concrete Specimens Under Mixed-Mode Loading (I+II) - Jaime GALVEZ, Universidad Politécnica de Madrid [Madrid] 10:55-11:15 (20min)

› Lattice model for numerical analysis of fracture process of concrete material under various loading conditions - ze chang, Delft University of Technology 11:15-11:35 (20min)

› Modelling of High-Cycle Fatigue Crack Growth in Concrete - Jan Cervenka, Cervenka consulting 11:35-11:55 (20min)

› Nonlinear Behavior Assessment of Reinforced Concrete Frames by Carbon Fiber Reinforced Polymers under Blast Loading using Finite Element Method - Mahdi Kolbadi, Department of civil engineering 11:55-12:15 (20min)

› Numerical Simulation of HS-SHCC under Quasi-static Tensile Loading - alaleh shehni, Institute of Concrete Structures, Technische Universität Dresden 12:15-12:35 (20min)

›10:35 (2h05)

MS1 : Self healing of concrete (Erik Schlangen)
E. Schlangen

› Amphi B

10:35 - 12:40 (2h05)

MS1 : Self healing of concrete (Erik Schlangen)

Amphi B

E. Schlangen

› An experimental and numerical investigation into the behaviour of vascular self-healing cementitious materials - Anthony Jefferson, Cardiff University 10:35-10:55 (20min)

› Modelling the carbonation reactions in self-healing concrete - Etelvina Javierre, Centro Universitario de la Defensa 10:55-11:15 (20min)

› Strength recovery of nano-reinforced cement mortars as parameter of self-healing evaluation: a methodological approach - Maria Amenta, National Center for Scientific Research "Demokritos" 11:15-11:35 (20min)

› Autogenous healing of fiber/matrix interface and its enhancement - Jishen Qiu, Nanyang Technological University 11:35-11:55 (20min)

› On the role of soft inclusions on the fracture behaviour of cement paste - Claudia Romero Rodriguez, Delft University of Technology 11:55-12:15 (20min)

›12:40 (1h20)

Lunch

12:40 - 14:00 (1h20)

Lunch

›14:00 (1h40)

MS11 : Fracture and durability of structures (H. Mang, B. Pichler & Y. Yuan)
B. Pichler

› Amphi 400

14:00 - 15:40 (1h40)

MS11 : Fracture and durability of structures (H. Mang, B. Pichler & Y. Yuan)

Amphi 400

B. Pichler

› Modeling corrosion of steel reinforcement in concrete: natural vs accelerated corrosion - Joško Ožbolt, University of Stuttgart 14:00-14:20 (20min)

› Numerical investigation of influence factors on concrete fracture properties determination - Gilda Daisse, University of Natural Resources and Life Sciences, Christian Doppler Laboratory for Life-Cycle Robustness in Fastening Technology, Vienna 14:20-14:40 (20min)

› Mesoscale investigation of the FPZ length/ Crack length correlation in quasi-brittle materials like concrete. - Nassima Aissaoui, Laboratoire RISAM Université de Tlemcen 14:40-15:00 (20min)

› Strain development of high strength grouts under compressive fatigue loading and determination of fatigue properties from self-heating measurements - Erisa Myrtja, Laboratoire de Mécanique et Technologie 15:00-15:20 (20min)

› Phenomenological modelling of impact of temperature on sorption and desorption isotherms and induced effects on tensile strength - Laurie Lacarrière, Université de Toulouse, UPS, INSA, LMDC (Laboratoire Matériaux et Durabilité des Constructions) 15:20-15:40 (20min)

›14:00 (1h40)

MS10 : Nuclear vessel behaviour under extreme loading (F.Dufour)
F. Dufour, A. Sellier

› Amphi A

14:00 - 15:40 (1h40)

MS10 : Nuclear vessel behaviour under extreme loading (F.Dufour)

Amphi A

F. Dufour, A. Sellier

› Study of the Containment History of the Vercors Mock-Up and Prediction of the Leakage Rate Under Pressurization Tests - Thibaud Thénint, Sixense NECS 14:00-14:20 (20min)

› Predicting the Permeability and Relative Permeability of Concrete - Gilles Pijaudier-Cabot, Laboratoire des Fluides Complexes et leurs Réservoirs 14:20-14:40 (20min)

› Critical overview and new conform matching law to assess permeability of concrete as a function of damage accounting for unloading path - Frédéric Dufour, Laboratoire Sols, Solides, Structures et Risques 14:40-15:00 (20min)

› Contribution of ENS Paris-Saclay to SINAPS@ project: Structural modelling of RC structures for seismic assessment - Frédéric Ragueneau, Laboratoire de Mécanique et Technologie 15:00-15:20 (20min)

› Overview Of Mitigation Models Dedicated To Severe Accidents And Consequences On Flow Ratethrough Containment Concrete Structures - Stéphane Mimouni, EDF 15:20-15:40 (20min)

›14:00 (1h40)

MS8 : Concrete at high temperatures (H. Carré & R. Felicetti)
H. Carré, R. Feliccetti

› Room 23

14:00 - 15:40 (1h40)

MS8 : Concrete at high temperatures (H. Carré & R. Felicetti)

Room 23

H. Carré, R. Feliccetti

› Assessment of Fire Exposed Concrete with Full-field Strain Determination and Predictive Modelling - Natalie Williams Portal, RISE Research Institutes of Sweden 14:00-14:20 (20min)

› Finite element analysis of hygro-thermal behaviour of concrete during fire spalling - RAMEZ BAYDOUN, Ramez 14:20-14:40 (20min)

› Multi-scale Modelling of Deteriorating Concrete at Elevated Temperature and Collapse Simulation of Underground Ducts - Keitai Iwama, Graduate School of Urban Innovation, Yokohama National University 14:40-15:00 (20min)

› Toward a fully coupled THM mesoscopic modelling of the behaviour of concrete at high temperature - Matthieu Briffaut, Laboratoire sols, solides, structures - risques [Grenoble] 15:00-15:20 (20min)

› Explosive Spalling in Concrete Exposed to High Temperature: Influence of Pore Pressure on Tensile Behaviour and Role of Mix Design - Roberto Felicetti, Politecnico di Milano 15:20-15:40 (20min)

›14:00 (1h40)

MS4 : Discrete modelling (John Bolander & Gianluca Cusatis)
J. Bolander

› Room 20

14:00 - 15:40 (1h40)

MS4 : Discrete modelling (John Bolander & Gianluca Cusatis)

Room 20

J. Bolander

› Simulating Hydraulic Fracturing Processes in Cement Composites using TOUGH-RBSN - daisuke asahina, Geological Survey of Japan 14:00-14:20 (20min)

› Analytical Investigation of the Influence of Rebar Arrangement on Corrosion Cracking Pattern by RBSM - Punyawut Jiradilok, The University of Tokyo 14:20-14:40 (20min)

› On macroscopic elastic properties of isotropic discrete systems: effect of tessellation geometry - Jan Elias, Brno University of Technology, Faculty of Civil Engineering, Institute of Structural Mechanics 14:40-15:00 (20min)

› Multiphysics Lattice Discrete Particle Model for the Simulation of Concrete Thermal Spalling - Lei Shen, Northwestern University [Evanston], Hohai University 15:00-15:20 (20min)

› Fracture simulation of concrete with ASR and DEF expansions by RBSM - Yushi Meng, The University of Tokyo [Tokyo] 15:20-15:40 (20min)

›14:00 (1h40)

C : Computational modeling 
J. Cervenka

› Room 22

14:00 - 15:40 (1h40)

C : Computational modeling 

Room 22

J. Cervenka

› Meshfree modelling of dynamic fracture in fiber reinforcec concrete - Rena C Yu, University of Castilla La Mancha 14:00-14:20 (20min)

› Discrete element modelling of high performance concretes: effect of aggregates properties - arnaud delaplace, LafargeHolcim R&D 14:20-14:40 (20min)

› Effect of Fibers, Distributed Net Reinforcement and Sharp Corners on Fracture and Size Effect in Concrete Structures - Zdeněk Bažant, Northwestern University [Evanston] 14:40-15:00 (20min)

› Modelling of the behavior of Steel-Concrete-Steel composite beams with a full or a partial composite action - Robine Calixte, SEMT, CEA DEN, Université Paris Saclay, 91191 Gif sur Yvette Cedex, France 15:00-15:20 (20min)

›14:00 (1h45)

MS3 : Non-destructive testing (Eric Landis)
E. Landis & M. Li

› Amphi B

14:00 - 15:45 (1h45)

MS3 : Non-destructive testing (Eric Landis)

Amphi B

E. Landis & M. Li

› A Quantitative Analysis of Toughening Mechanisms in Steel Fibre Reinforced Ultra-High-Performance Concrete Through Multimodal Nondestructive Evaluation - Eric Landis, University of Maine 14:00-14:25 (25min)

› Improvement of Impact-Echo Method by Applying Image Recognition of Sound Spectrogram - HIROSHI SHIMBO, Hosei University [Chiyoda] 14:25-14:45 (20min)

› Support vector machine procedure and Gaussian mixture modelling of Acoustic emission signals to study crack classification in reinforced concrete structures - Vidya Sagar R, Indian Institute of Science, Bangalore 14:45-15:05 (20min)

› Acoustic emission-based analysis of damage mechanisms in steel fibre reinforced concrete under monotonic and cyclic loading - Maure De Smedt, Department of Civil Engineering [KU Leuven] 15:05-15:25 (20min)

› Clustering of acoustic emission signals for fracture monitoring during accelerated corrosion of reinforced concrete prisms - Charlotte Van Steen, Catholic University of Leuven 15:25-15:45 (20min)

›15:40 (30min)

Coffee break

15:40 - 16:10 (30min)

Coffee break

›16:10 (1h)

FraMCoS assembly

16:10 - 17:10 (1h)

FraMCoS assembly

FraMCoS Assembly in room 400.

›19:00 (3h)

Conference dinner - Casino Bellevue, Biarritz

19:00 - 22:00 (3h)

Conference dinner - Casino Bellevue, Biarritz